- Following 888
- Followers 8.8K
- Engagement 1.65%
- Avg likes 125
- Avg comments 5
About SoundImports
SoundImports (@soundimports.eu) is a Home Services creator on Instagram, also filed under Art & DIY. The account has 8,808 followers and 576 published posts. Recent posts average 125 likes and 5 comments, an engagement rate of 1.65%.
SoundImports belongs to the nano tier, the band usually drawn between 1,000 and 10,000 followers. SoundImports follows 888 accounts, so the audience is roughly 9.9 times the size of the list followed. SoundImports is set up as an Instagram business account. Flinque files SoundImports under Home Services, with Art & DIY as a secondary category.
The Instagram bio for SoundImports runs to 18 words. The bio tags #diyaudio. The latest activity Flinque has on record for SoundImports dates from May 2026.
Story Highlights
Unlocking shows the title and cover image of every story highlight this creator keeps pinned to the profile.
576 Posts
Of the 10 most recent posts shown for SoundImports, 8 are carousels and 2 are videos. That mix leans toward carousels. SoundImports has built a substantial archive of 576 posts. Against the audience, that is roughly 15 followers for each post published. SoundImports also keeps 2 story highlights on the profile. All 10 carry captions, averaging 186 words each. The captions are written mainly in English. Words that recur across them include sharing, build, design, speaker and audio.
The Dayton Audio DATS LA Loudspeaker Analyzer has recently been featured in an in-depth review by, a respected platform in both high-end audio and professional loudspeaker development.
In their โFresh From the Benchโ article, they test the DATS LA in real-world use and highlight its measurement capabilities for loudspeaker design and troubleshooting.
The DATS LA is a unit that belongs on the bench of any serious speaker builder or designer who wants to get detailed data on driver performance without mortgaging the house.
Some key points from the review:
โข Integrated 100W AC/DC amplifier for small- and large-signal testing โข Measures T/S parameters, impedance, Bl(x), and Kms(x) behavior โข Patented DC-biased testing method for symmetry analysis โข Automated cooling intervals during high-power testing โข QA tool (Rub&Buzz test) for incoming QC tests, perfect for small speaker manufacts.
โข Large-signal testing to analyze thermal compression and excursion behavior โข Measured results closely matched CLIO and Audio Precision reference systems
AudioXpress also highlighted how the DATS LA provides insight into motor symmetry, suspension behavior, excursion limits, and force factor performance, capabilities typically associated with far more expensive measurement platforms.
A great read if you want to see how these measurement principles are applied in real loudspeaker engineering! ๐๐ฅ
We really like the thinking behind this DSP bookshelf speaker build, build by a customer of ours, who pushed the boundaries of DIY Audio. Everything about the project feels carefully considered to get the maximum performance out of a compact enclosure.
Each speaker uses Dayton Audio TCP115-4 midwoofers and Dayton Audio ND28F-6 tweeters. 2x side-mounted passive radiators per speaker and a Sure/Wondom JAB4 amp. board with ADAU1701 DSP. A setup focused on flexibility, controlled tuning, and efficient use of cabinet space.
Certainly also due to the TCP115 woofer, with an Fs of 55 Hz and Qts of 0.45, the TCP is the ideal woofer to combine with passives in a small enclosure, to extend low-end response. The passive radiators help extend the low-end performance without needing large ports, while DSP control gives precise adjustment over the entire system response.
What makes this build especially interesting is the fully active approach. Instead of using a traditional passive crossover, the system relies on DSP for crossover integration, EQ, level matching, and future expandability with an adjustable subwoofer output for a potential 2.1 setup.
Components used in this build:
โข TCP115-4 Midwoofers | 16.95 eur each
โข ND28F-6 Tweeters | 17.45 eur each
โข JAB4 amp board | 64.95 eur each
Together, these components create a compact speaker system focused on controlled bass performance, DSP flexibility, and detailed sound from a small enclosure.
Awesome work, again thanks for sharing! ๐
Would you choose a passive crossover or a fully DSP-controlled active setup? ๐๐ Let us know in the comments!
We really like the approach behind this build. By using an isobaric woofer configuration, the design manages to keep the enclosure relatively compact while still delivering the kind of bass performance youโd normally expect from a larger cabinet.
Itโs also great to see how much attention went into the overall look of the speakers. The clean grey-and-black finish works really well with the technical side of the design, making it feel like a complete project rather than just a test build.
Builds like this are a good example of how creative design choices and the right components can completely change whatโs possible within a certain enclosure size.
Parts used in this build:
โข SB17NRX2C35-8 Norex Bass-midwoofer
โข SB26ADC-C000-4 Dome Tweeter
โข Passive Radiator
โข and x-over parts
Each speaker uses dual SB Acoustics SB17NRX2C35 woofers in an isobaric setup, combined with the SB26ADC-C000-4 tweeter and a custom 3D printed waveguide. A combination focused on controlled low-end, clean integration, and consistent dispersion.
Together, these drivers create a balanced system with deep bass performance, controlled response, and detailed high frequencies in a relatively compact design.
An extensive x-over is specially made for this design, with high-end parts from and
Great to see our components used in projects like this. Thanks for sharing! ๐
Would you ever consider building an isobaric speaker design? ๐๐
We really like how this build balances design and performance. The bold color choice gives it an immediate visual impact, but the overall execution stays clean and intentional. Nothing feels overdone, just a well-proportioned two-way speaker that clearly follows a thoughtful design approach.
What stands out most is how everything comes together as a complete system. The cabinet design, driver placement, and overall finish all work in the same direction, resulting in a speaker that feels both distinctive and well put together. Itโs a good reminder that even a relatively straightforward concept can turn into something really complete when the details are considered properly.
- RS180P-4 7โ Woofer
- RST28A-4 Tweeter
Together, these drivers form a balanced two-way system focused on clarity, detail, and controlled performance across the full frequency range!
Really appreciate you sharing this build with us u/samthecellarman (Reddit), ๐๐ผ
What makes a great speaker for you? ๐
Always cool to see someone take that first step into DIY audio. Starting from an idea, figuring things out along the way, and ending up with something that actually plays. ๐ฅ
What stands out here is how everything comes together into a working speaker. That moment where your build actually plays for the first time never gets old.
This build is based on the Argos: a well-known 5โ two-way bookshelf kit, designed as a compact but capable entry into DIY speaker building. It has become a popular reference project within the DIY community for its balanced performance and straightforward design approach.
The 5FE120 used here is a 5โ midwoofer with around 88 dB sensitivity and solid power handling, which helps this build deliver more output than youโd expect from a compact setup.
Thanks DownfallDingo for sharing your build on your Reddit account.
What was the biggest challenge in your first build? Let us know in the comments below ๐๐ป ๐
We really like seeing projects like this, where an idea slowly turns into a fully developed design. This one started with a clear goal: build a compact subwoofer that still goes deep and stays controlled, and itโs great to see that idea carried through so consistently.
The build is based around the GRS 12SW-4HE driver in a ported 18 mm MDF enclosure. From the first simulations to the final CAD design, everything was developed step by step, with a clear focus on getting the tuning right rather than just making something that works.
In the end, it resulted in a 79.1 litre enclosure tuned to 21.5 Hz, with an f3 of 20.3 Hz and an f6 of 18.1 Hz. What we like here is that itโs clearly designed for controlled, deep bass rather than just raw output.
From cutting panels to assembling and sealing the cabinet, itโs a clean and well thought-out build, finished in semi-gloss black for a simple, solid look.
Powered by a M03 subwoofer amplifier and a DSP setup with dual DACs, everything comes together in a flexible and well-balanced system.
Great to see our components used throughout this projec, and even better to see them used in a build thatโs been approached this carefully. ๐
Parts used in this build:
โข 12SW-4HE Subwoofer Driver
โข Fosi Audio M03 Mono Subwoofer Amplifier
โข Raspberry Pi 4 (DSP platform)
Thank you for sharing ๐ฅ
How do you usually approach a subwoofer build? Do you start with the target sound, or the enclosure design? ๐๐
If youโve been waiting to start (or finish) your next speaker project, nowโs the moment to grab your favourites before theyโre gone again.
Shop the latest stock now and get building.
We really like how the enclosure is designed here. The built-in channels help get more out of a compact speaker. The Tang Band subwoofer delivers deep low-end, while the full-range drivers handle mids and highs, this small setup really packs a punch.
The 3D print files for this build come frome hexibase which is a great example of how shared designs can help bring projects like this to life. It also shows how you can take an existing design and make it your own.
The amplifier and cable kit tie it all together, making it easy to fine-tune the sound and get the most out of the system.
Builds like this show how much you can do with 3D printing in DIY audio, turning compact components into a full-featured, well-balanced speaker.
Parts used in this build:
- Sure Electronics AA-JA33285 Amplifier Module 4x30W
- Sure Electronics AA-JA11117 Functional Cables Kit
- Tang Band W5-1138SMF Subwoofer
- Dayton Audio DMA80-4 Full-Range Driver (x2)
Nice to see our components used in projects like this. Thanks for sharing!
Have you experimented with 3D printing in your builds? Let us know in the comments!
We received this awesome unboxing and first impression video from and weโre happy to share his first impressions with you! ๐
In this video he unboxes three of our bass shakers: the Xcite XBS25-4, XBS50-4 and XBS100-4. Xcite bass shaker converts low-frequency audio into vibrations you can actually feel. Attach it to your chair or setup, and suddenly your audio becomes a full-body experience.
The XBS100-4 is even BST-1 / AST-2B-4 โcompatibleโ โ> industry-standard mounting diameter for a seamless โDrop-inโ upgrade.
โขXBS25-4 โ Compact and precise. Perfect for subtle feedback or smaller setups.
โขXBS50-4 โ The sweet spot. More power and depth for a truly immersive upgrade.
โขXBS100-4 โ Maximum impact. Designed for those who want to feel every detail.
Always great to see how youโre using our products. Thanks for sharing your experience!
Which one would you go for? ๐ Let us know in the comments and follow and on to find more about Xcite products integrated in sim racing.
All Xcite products available via several resellers including
We like how this build keeps things compact, but still pays attention to the details that matter, from the 3D printed enclosure to the DSP tuning behind it!
Combining a wideband driver with passive radiators + JAB3+ amplifier board makes for an interesting approach in a setup like this, especially for nearfield use.
Itโs projects like these that remind us how much you can do within a small form factor, just by experimenting and refining along the way. ๐ง Love it!
Cool to see our components come together in builds like this. Thanks for sharing!
Some product highlights:
SEAS FL8RCND/S
Excursion: 9.2 mm
Fs: 70 Hz
Qms: 4.4
Dayton Audio ND90-PR
Excursion: 18mm peak to peak
Fs: 53.8 Hz
Qms: 6.15
What would you experiment with in a setup like this? ๐๐
Thumbnails are unavailable for 10 of these 10 posts. Open a tile to view the post on Instagram.
SoundImports's engagement
SoundImports's engagement rate on Instagram is 1.65%, between 1% and 3%, or 1 to 3 likes and comments per 100 followers. On a typical post that comes to about 1 like or comment for every 61 followers. An average post collects 125 likes and 5 comments, close to 25 likes for each comment.
Engagement rate
1.65%
- Avg likes
- 125
- Avg comments
- 5
- Interactions : followers
- 1 : 61
Lookalike Creators
A free account lists creators whose audiences behave like this one, ready to shortlist and compare side by side.
Age & Gender
Unlocking shows how this audience splits across age bands and gender, charted from follower data.
Audience Location
Unlocking reveals the countries and cities where the most active followers of this account are concentrated.
Primary Language
Unlocking shows the languages this audience uses most in comments, interactions and the content it consumes.
Audience Interests
Unlocking lists the topics and categories this audience follows and engages with most often across the platform.
Authenticity
Unlocking scores how genuine the audience is, flagging fake, inactive or bot followers found in engagement patterns.
Audience Quality Score
Unlocking gives one overall audience quality score combining authenticity, engagement, follower activity and audience relevance.
Brand Affinity
Unlocking names the brands this audience already follows, mentions or engages with across social platforms.
Content Strategy
Unlocking breaks down the content pillars, tone and visual style this creator uses, and which formats perform best.
Commercial Insights
Unlocking shows collaboration types, an estimated pricing tier and a brand safety risk read for sponsored campaigns.
Industry Fit
Unlocking rates how well this creator and audience align with specific industry verticals and brand categories.
Research SoundImports further
Flinque ranks Instagram creators in Art & DIY, categories SoundImports is filed under, and its free tools measure the same figures for any public account.
Related rankings
Frequently asked questions
These answers about SoundImports are generated from the Instagram profile data Flinque holds for the account.
Who is SoundImports?
SoundImports (@soundimports.eu) is a Home Services creator on Instagram, also filed under Art & DIY. SoundImports is set up as an Instagram business account. The Instagram bio for SoundImports runs to 18 words.
How many followers does SoundImports have?
SoundImports has 8,808 followers on Instagram (8.8K). SoundImports follows 888 accounts, so the audience is roughly 9.9 times the size of the list followed. SoundImports has built a substantial archive of 576 posts.
What is SoundImports's engagement rate?
SoundImports's engagement rate on Instagram is 1.65%, between 1% and 3%, or 1 to 3 likes and comments per 100 followers. On a typical post that comes to about 1 like or comment for every 61 followers. An average post collects 125 likes and 5 comments, close to 25 likes for each comment.
What does SoundImports post about on Instagram?
Flinque files SoundImports under Home Services, with Art & DIY as a secondary category. Of the 10 most recent posts shown for SoundImports, 8 are carousels and 2 are videos. The 10 recent Instagram captions Flinque holds for SoundImports repeatedly use the words sharing, build, design, speaker and audio. SoundImports writes those captions mainly in English. The bio tags #diyaudio. SoundImports keeps 2 story highlights, which open with a free Flinque account.
How do I contact SoundImports for a collaboration?
SoundImports's contact details are not published on Flinque's public profile. The Instagram bio links to 1 external site, and a free Flinque account opens that link. The account is registered as an Instagram business account. Brands with a free Flinque account can shortlist SoundImports and use Flinque's outreach tools wherever a contact route is on file.
Links
SoundImports's own Instagram profile is the one outbound link Flinque publishes for the account, and the bio link opens after signing up.
Public profile data sourced from Instagram. Flinque is not affiliated with SoundImports.