New Flinque AI now scores creator authenticity in real time across 4 platforms. See how
Clint (@chevyhotrodder), Instagram profile photo
Verified on Instagram

Clint

Cars
@chevyhotrodder
Dad. Husband. Engineer. Amateur builder/fabricator. Cancer survivor. 70 Nova LS swapped owned for 25yrs. Southern California.
  • Automotive
  • Following 3K
  • Followers 14.2K
  • Engagement 8.28%
  • Avg comments 24

About Clint

Clint (@chevyhotrodder) is a Cars creator on Instagram, also filed under Automotive. The account has 14,247 followers and 1,839 published posts. Recent posts average 1,335 likes and 24 comments, an engagement rate of 8.28%.

With 14.2K followers, Clint is a micro creator by the common 10,000 to 100,000 definition. Clint follows 3,018 accounts, so the audience is roughly 4.7 times the size of the list followed. Clint uses an Instagram professional account. Flinque files Clint under Cars, with Automotive as a secondary category.

The Instagram bio for Clint runs to 17 words. The latest activity Flinque has on record for Clint dates from May 2023.

Story Highlights

Unlocking shows the title and cover image of every story highlight this creator keeps pinned to the profile.

1,839 Posts

Of the 10 most recent posts shown for Clint, 5 are single images, 3 are carousels and 2 are videos. No single format accounts for most of them. Clint has built a substantial archive of 1,839 posts. Against the audience, that is roughly 7.7 followers for each post published. Clint also keeps 19 story highlights on the profile. All 10 carry captions, averaging 63 words each. The captions are written mainly in English. Words that recur across them include still, seat, rear, front and printed. The captions tag #3dprinting, #chevynova, #restomod, #underdashcreeper and #safety.

3D printing opened up a lot of options. I created my own custom gauge cluster and printed it in ABS. Now I'm working on a center console. See my story highlights for more.
.
#3dprinting #chevynova #restomod
๐Ÿš—:
๐ŸŽจ:
๐Ÿ“: Ventura, CA
Couldn't tell you how many times I stopped by this Fosters Freeze when I was in highschool. Always had to turn the car off to place my order at the drive thru (exhaust was thundering). I didn't have cup holders for my Butterfinger & Reese's Twister, but I still had the bench seat for packing in all my friends. Glad this one is still around!
.
Thanks for grabbing lunch with me
Let's normalize the under dash creeper as a standard tool in our arsenal. Not having one is a pain in the neck!
.
#underdashcreeper
I'm still here.
Seat time is the best upgrade ๐Ÿ’ฏ Enjoy your cars friends and be safe out there.
.
Thanks for capturing the outside footage ๐Ÿ‘Š
There was a beautiful sunrise in Santa Maria this weekend. Driving up the coast in the dark with heavy fog made me grateful for the Dapper projector headlights. With the days getting shorter, they'll be getting a lot of use again and my mind is still blown by how much more I can see. And I'm sure the bright LED panels out back kept people from running into me when we hit a fog bank in the construction zone near Santa Barbara.
.
#safety #ledheadlights #dapperlighting
My interior is coming back together and I couldn't be happier with the color combination! I have Rally Houndstooth seats on modified/lowered brackets and installed their matching cover over the rear seat. Gauges are CAN-BUS and GPS mounted in my custom 3D printed cluster. The fun comes from a Magnum-F six speed. retracting shoulder harnesses front and back to keep me and my kids safe. Bluetooth stereo is making tunes and I've 3D printed some temporary cup holders because every car should have some! I've even got a backup camera in the rear mirror. I plan to do a custom 3D printed console next.
Smoke 'em if you got 'em. Great tool and they make versions for every budget from a simple paint can with a heater to professional grade machines.
.
#automotivediy #vacuumleaks
I get asked so often that I'm pinning this post. My wheels are 18x8 0offset 4.5"bs and 18x9 0offset 5"bs Rev Wheels 107s with GM derby caps. The rear axle has been narrowed 2" total using Strange housing ends. I then added 1/4" wheel spacers to fine tune clearance. This gives my rear wheels more dish and allows fitment for common/cheaper 1pc cast wheels which aren't typically available in backspacing suitable for a Nova. For a stock width rear it would be the equivalent of 18x9 3/4" offset 5-3/4"bs. Tires are 245/40R18 front and 275/35R18 rear Falken RT660s. Rear has the shocks relocated inboard of the frame and the inside of the lip trimmed about 1/4". The tubs are stock (not mini tubbed). Front has stock inner fenders unmodified except for replacing the perimeter bolts with button heads for clearance. I run 1deg camber minimum and the front tires clear the inside of the fender just fine. Different braking packages can make a difference. I use Kore3 hubs and C6 brakes up front on stock spindles. This particular wheel will not fit Z51 or larger brake packages. The tires do not rub going down the road or autocross except at full lock they rub the frame. The rear will sometimes rub going diagonally across an uneven surface like entering a sloped driveway at an angle. Car is lowered via 1.5" Hotchkis drop leaf springs rear and approximately 2" drop up front via AFCO spring adjusters.
#nowyouknow
๐Ÿ“ท ๐Ÿ™

Clint's engagement

Clint's engagement rate on Instagram is 8.28%, over 6%, more than 6 likes and comments per 100 followers. On a typical post that comes to about 1 like or comment for every 12 followers. Likes outnumber comments by roughly 56 to 1, with 1,335 likes and 24 comments on an average post, so most reactions are taps rather than replies.

Engagement rate

8.28%

Avg likes
1.3K
Avg comments
24
Interactions : followers
1 : 12

Lookalike Creators

A free account lists creators whose audiences behave like this one, ready to shortlist and compare side by side.

Age & Gender

Unlocking shows how this audience splits across age bands and gender, charted from follower data.

Audience Location

Unlocking reveals the countries and cities where the most active followers of this account are concentrated.

Primary Language

Unlocking shows the languages this audience uses most in comments, interactions and the content it consumes.

Audience Interests

Unlocking lists the topics and categories this audience follows and engages with most often across the platform.

Authenticity

Unlocking scores how genuine the audience is, flagging fake, inactive or bot followers found in engagement patterns.

Audience Quality Score

Unlocking gives one overall audience quality score combining authenticity, engagement, follower activity and audience relevance.

Brand Affinity

Unlocking names the brands this audience already follows, mentions or engages with across social platforms.

Content Strategy

Unlocking breaks down the content pillars, tone and visual style this creator uses, and which formats perform best.

Commercial Insights

Unlocking shows collaboration types, an estimated pricing tier and a brand safety risk read for sponsored campaigns.

Industry Fit

Unlocking rates how well this creator and audience align with specific industry verticals and brand categories.

Research Clint further

Flinque ranks Instagram creators in Automotive, categories Clint is filed under, and its free tools measure the same figures for any public account.

Frequently asked questions

These answers about Clint are generated from the Instagram profile data Flinque holds for the account.

Who is Clint?

Clint (@chevyhotrodder) is a Cars creator on Instagram, also filed under Automotive. Clint uses an Instagram professional account. The Instagram bio for Clint runs to 17 words.

How many followers does Clint have?

Clint has 14,247 followers on Instagram (14.2K). Clint follows 3,018 accounts, so the audience is roughly 4.7 times the size of the list followed. Clint has built a substantial archive of 1,839 posts.

What is Clint's engagement rate?

Clint's engagement rate on Instagram is 8.28%, over 6%, more than 6 likes and comments per 100 followers. On a typical post that comes to about 1 like or comment for every 12 followers. Likes outnumber comments by roughly 56 to 1, with 1,335 likes and 24 comments on an average post, so most reactions are taps rather than replies.

What does Clint post about on Instagram?

Flinque files Clint under Cars, with Automotive as a secondary category. Of the 10 most recent posts shown for Clint, 5 are single images, 3 are carousels and 2 are videos. The 10 recent Instagram captions Flinque holds for Clint repeatedly use the words still, seat, rear, front and printed. Clint's captions carry hashtags such as #3dprinting, #chevynova and #restomod. Clint writes those captions mainly in English. Clint keeps 19 story highlights, which open with a free Flinque account.

How do I contact Clint for a collaboration?

Clint's contact details are not published on Flinque's public profile. The Instagram bio links to 2 external sites, and a free Flinque account opens those links. Brands with a free Flinque account can shortlist Clint and use Flinque's outreach tools wherever a contact route is on file.

Clint's own Instagram profile is the one outbound link Flinque publishes for the account, and the 2 bio links open after signing up.

Public profile data sourced from Instagram. Flinque is not affiliated with Clint.

Unlock Clint's audience data